CA Technologies, A Broadcom Company, is alerting customers to three vulnerabilities in CA Unified Infrastructure Management (Nimsoft / UIM). Multiple vulnerabilities exist that can allow an unauthenticated remote attacker to execute arbitrary code or commands, read from or write to systems, or conduct denial of service attacks. CA published solutions to address these vulnerabilities and recommends that all affected customers implement these solutions. The first vulnerability, CVE-2020-8010, occurs due to improper ACL handling. A remote attacker can execute commands, read from, or write to the target system. The second vulnerability, CVE-2020-8011, occurs due to a null pointer dereference. A remote attacker can crash the Controller service. The third vulnerability, CVE-2020-8012, occurs due to a buffer overflow vulnerability in the Controller service. A remote attacker can execute arbitrary code.
b836a3683ff08a889e3a66d3ea648cdf-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA256
CA20200205-01: Security Notice for CA Unified Infrastructure Management
Issued: February 5th, 2020
Last Updated: February 14th, 2020
CA Technologies, A Broadcom Company, is alerting customers to three
vulnerabilities in CA Unified Infrastructure Management (Nimsoft / UIM).
Multiple vulnerabilities exist that can allow an unauthenticated remote
attacker to execute arbitrary code or commands, read from or write to
systems, or conduct denial of service attacks. CA published solutions to
address these vulnerabilities and recommends that all affected customers
implement these solutions.
The first vulnerability, CVE-2020-8010, occurs due to improper ACL
handling. A remote attacker can execute commands, read from, or write to
the target system.
The second vulnerability, CVE-2020-8011, occurs due to a null pointer
dereference. A remote attacker can crash the Controller service.
The third vulnerability, CVE-2020-8012, occurs due to a buffer overflow
vulnerability in the Controller service. A remote attacker can execute
arbitrary code.
Risk Rating
High (cumulative)
Platform(s)
All supported robot platforms (i.e. Windows, Linux, Solaris, AIX, and
HPUX)
Affected Products
UIM product versions 9.20 and below are affected. The applicable
component is robot (also known as controller).
The robot versions below 7.97HF8, 9.20HF9 and 9.20SHF9 are affected.
How to determine if the installation is affected
Check for the controller version in IM or AC. If the version is lower
than 7.97HF8 for UIM 9.0.2, and 9.20HF9 or 9.20SHF9 for UIM 9.2.0, then
it is affected.
Solution
CA Technologies published the following solutions to address the
vulnerabilities:
robot_update patches 7.97HF8 (or above), 9.20HF9 (or above), and
9.20SHF9 (or above)
Note: UIM 8.5.1 users must upgrade robot to 7.97HF8.
Hotfixes are available at (url may wrap):
https://techdocs.broadcom.com/us/product-content/recommended-reading/techni
cal-document-index/ca-unified-infrastructure-management-hotfix-index.html
References
CVE-2020-8010 - CA UIM Probe Improper ACL Handling RCE
CVE-2020-8011 - CA UIM Improper Probe Handling NPD DoS
CVE-2020-8012 - CA UIM nimbuscontroller Buffer Overflow RCE
Acknowledgement
CVE-2020-8010 - Milton Valencia (wetw0rk), IBM Public Cloud Red Team
CVE-2020-8011 - Milton Valencia (wetw0rk), IBM Public Cloud Red Team
CVE-2020-8012 - Milton Valencia (wetw0rk), IBM Public Cloud Red Team
Change History
Version 1.0: 2020-02-05 - Initial Release
Version 1.1: 2020-02-14 - Clarified "How to determine if installation
is affected" section
CA customers may receive product alerts and advisories by subscribing
to Proactive Notifications on the support site.
Customers who require additional information about this notice may
contact CA Technologies Support at https://support.broadcom.com/
To report a suspected vulnerability in a CA Technologies product,
please send a summary to the CA Technologies Product Vulnerability
Response Team at ca.psirt <AT> broadcom.com
Security Notices, PGP key, disclosure policy, and related guidance can
be found at https://techdocs.broadcom.com/ca-psirt
Regards,
Ken Williams
Vulnerability and Incident Response, CA PSIRT
https://techdocs.broadcom.com/ca-psirt
Broadcom | broadcom.com | Kansas City, Missouri, USA
ken.williams <AT> broadcom.com | ca.psirt <AT> broadcom.com
Copyright © 2020 Broadcom. All Rights Reserved. The term “Broadcom”
refers to Broadcom Inc. and/or its subsidiaries. Broadcom, the pulse
logo, Connecting everything, CA Technologies and the CA technologies
logo are among the trademarks of Broadcom. All trademarks, trade names,
service marks and logos referenced herein belong to their respective
companies.
-----BEGIN PGP SIGNATURE-----
Version: Encryption Desktop 10.3.2 (Build 15238)
Charset: utf-8
wsBVAwUBXkX9c7Z6yOO9o8STAQjKpwf/RExnHGFP+4zIlNd87RX5G6aKjms1ViYp
BCvqgpUPatEoM6ShJjcBB89+kdheMwhbDdPLWthSs8zuGSyv+SGZ0m/pWIRaYKjv
owXKZPoGLbJXuOtFhvj9j5KnDR/j1S3Cbz3TJHkHuhJ0BgR6xcqHgDSMVJpG78RT
MHWufIURi217sAh6ivu05oxQzbh9YHUiqX78PxePDpJX0z/+2dEYxxTRVjq0wC1j
zQFu3Zu2Z/VuXWzqa+XUzlGlGfiJMPl23rshSwKvasqseOirFH3eIYLl1SuxMu8m
1HYOYdpEDEOuPAaXjU+2He0r2s73nO/WomY2MZq9FREuHkWlQq4xqA==
=pDUq
-----END PGP SIGNATURE-----